Lithium-ion battery, resin assembly machine

A wide range of battery related pouch forming and sealing machines are available to you.

Lithium-ion battery manufacturing facilities

Equipment for electrode stacking(Bagging machine)  Model:LP-ESL

  • This is a stacking device for ceramic separators.
  • The electrode supply method is by magazine or roll.
  • The positive electrode is wrapped in a separator, and the negative and positive electrodes are stacked alternately.
  • It can be applied to stacked products other than lithium-ion batteries.

Tab Welding Machine  Model:LP-WD

  • This equipment welds the tabs of the positive and negative electrodes to the electrode stack product using ultrasonic waves.
  • We can support ultrasonic welding machines of major domestic and overseas manufacturers.
  • Welding conditions can be set on the operation panel of the machine.
  • The product setting jig determines the position of the electrode stack product and tabs, eliminating the need for troublesome positioning.

Pouch Forming Machine  Model:LP-PA

  • Unwrap the wrapping material from the roll material and cut it at a fixed pitch.
    The system then feeds the packaging material into the mold, forms pockets, processes pilot holes, trims, and then discharges the material into the magazine.

Three-way sealing machine  Model:LP-SE

  • This equipment heat-seals the packaging material in three directions except for the electrolyte inlet.
  • Cooling is performed after heat sealing to improve seal strength.
  • The sealing temperature, time, and pressure can be set and changed on the operation panel.
  • High-precision sealing is possible by using a sealing jig.
  • Control of sealing thickness : We will meet your request to the extent possible.
Model LP-ES(LP-ESL) LP-WD LP-PA LP-SE
Cycle time* 1cell/2min (Reference size)
※Depends on battery size.
1cell/30sec
(Reference value)
1cell/30sec
(Reference value)
30sec/1cell
(Reference value)
Corresponding size Various size corresponding. Suggest to suit specification. Corresponding to various sizes. Up to A4 size Maximum A4 size. Other size is suggestions according to specification.Seal length 300mm corresponding.
Product supply method Electrode:magazine or roll
Separator:Tray
Set by an operator on a jig. Roll Set by an operator on a jig.
Collected method Stacking to magazine
Magazine retrieval by operator
Automatic jig ejection.
Jig retrieval by operator.
Stacking to magazine
Magazine retrieval by operator
Automatic jig ejection.
Jig retrieval by operator.
Inspection/measurement function -
Option -
Power supply 3-phase AC200V 50/60Hz
Control method Programmable Logic Controller

* It varies depending on the size and number of sheets to be manufactured.

Plastic parts assembly machine

Plastic parts assembly machine

  • A device that automatically assembles plastic products consisting of multiple types of workpieces.
  • It is assembled by mating.
Model LSL-A
Cycle time 60ppm
Corresponding size -
Product supply method Parts Feeder
Collected method -
Inspection/measurement functions -
Option Image inspection support
Power supply 3-phase AC200~240V,50/60Hz, 0.5MPa
Control method Programmable Logic Controller